The Japanese Jurisdictional Module was created to allow market participants to comply with the amendments to the Comprehensive Guidelines issued by Japanese Financial Services Agency (the JFSA) regarding contractual stays in certain financial contracts governed by non-Japanese law (Japanese Regulation). Adhering Parties will be able to adhere to the Japanese Jurisdictional Module and identify themselves as either “Regulated Entities” that are subject to the Japanese Regulation or “Module Adhering Parties” that are adhering for the purpose of satisfying the regulatory requirements applicable to their counterparties under the Japanese Regulation.

Please refer to the “Frequently Asked Questions” below for more information.

The Japanese Jurisdictional Module is open to ISDA members and non-members. Parties will pay a one-time fee of $500 to ISDA for each adherence to the Japanese Jurisdictional Module. There is no cut-off date to the Japanese Jurisdictional Module. ISDA does, however, reserve the right to designate a cut-off date by giving 30 days’ notice on this site.

ISDA has prepared this list of frequently asked questions to assist in your consideration of the JAPANESE JURISDICTIONAL MODULE to the ISDA RESOLUTION STAY JURISDICTIONAL MODULAR PROTOCOL (the ISDA Jurisdictional Modular Protocol).

THESE FREQUENTLY ASKED QUESTIONS DO NOT PURPORT TO BE AND SHOULD NOT BE CONSIDERED A GUIDE TO OR AN EXPLANATION OF ALL RELEVANT ISSUES OR CONSIDERATIONS IN CONNECTION WITH THE JAPANESE JURISDICTIONAL MODULE. PARTIES SHOULD CONSULT WITH THEIR LEGAL ADVISERS AND ANY OTHER ADVISER THEY DEEM APPROPRIATE PRIOR TO USING OR ADHERING TO THE JAPANESE JURISDICTIONAL MODULE. ALL TRANSLATIONS OF JAPANESE WORDS OR PHRASES ARE UNOFFICIAL. ISDA ASSUMES NO RESPONSIBILITY FOR ANY USE TO WHICH ANY OF ITS DOCUMENTATION MAY BE PUT.

These FAQs address the following questions:

  • What is the purpose of the Japanese Jurisdictional Module?
  • How does adherence to the Japanese Jurisdictional Module and the ISDA Jurisdictional Modular Protocol work?
  • How does the Japanese Jurisdictional Module relate to the Japanese Regulation?
  • Why are certain terms in italics and others in quotation marks?
  • What agreements are Covered Agreements under the Japanese Jurisdictional Module?
  • What entities are Regulated Entities under the Japanese Jurisdictional Module?
  • When does the Japanese Jurisdictional Module become effective?
  • How do I sign up to the Japanese Jurisdictional Module?

The ISDA Jurisdictional Modular Protocol is designed to facilitate market participants’ compliance with regulations regarding contractual stays in financial contracts governed by third-country law in different jurisdictions. As regulations are adopted in a jurisdiction, a “Jurisdictional Module” to the ISDA Jurisdictional Modular Protocol could be published that would include operational provisions based on the text of that regulation and aimed at enabling parties to comply with those requirements. A party will be able to adhere to a particular Jurisdictional Module by submitting an Adherence Letter for such Jurisdictional Module. Each Jurisdictional Module will be considered individually.

For more information on the ISDA Jurisdictional Modular Protocol and adherence to the ISDA Jurisdictional Modular Protocol, please see the general FAQs for the ISDA Jurisdictional Modular Protocol.

What is the purpose of the Japanese Jurisdictional Module?

The Japanese Jurisdictional Module was created to allow market participants to comply with the 1 April 2017 amendments to the Comprehensive Guidelines issued by Japanese Financial Services Agency (the JFSA) regarding contractual stays in certain financial contracts governed by non-Japanese law (Japanese Regulation). Adhering Parties will be able to adhere to the Japanese Jurisdictional Module and identify themselves as either “Regulated Entities” that are subject to the Japanese Regulation or “Module Adhering Parties” that are adhering for the purpose of satisfying the regulatory requirements applicable to their counterparties under the Japanese Regulation.

How does adherence to the Japanese Jurisdictional Module and the ISDA Jurisdictional Modular Protocol work?

Does a Module Adhering Party have to amend its Covered Agreements with all Regulated Entities?

No, a Module Adhering Party has the ability to choose the Regulated Entity or Regulated Entities it would like to amend its Covered Agreements with when it adheres to the Japanese Jurisdictional Module. Once a Module Adhering Party chooses to amend its agreements with a particular Regulated Entity, that Regulated Entity is defined as a “Regulated Entity Counterparty” with respect to that particular Module Adhering Party and to the Japanese Jurisdictional Module.

Module Adhering Parties have multiple options for how they can choose the Regulated Entity or Regulated Entities they would like to amend their Covered Agreements with.

How can a Module Adhering Party choose which Regulated Entities it will amend its Covered Agreements with?

A Module Adhering Party with respect to the Japanese Jurisdictional Module may choose the Regulated Entity or Regulated Entities it would like to amend its Covered Agreements with by choosing between the following three options in its Adherence Letter:

  • All Regulated Entities: Under this option, a Module Adhering Party identifies every Adhering Party that has identified itself as a “Regulated Entity” with respect to the Japanese Jurisdictional Module to be a Regulated Entity Counterparty with respect to it. That means that the Module Adhering Party is agreeing to amend all of the relevant Covered Agreements with all of the Regulated Entities that have adhered or will adhere in the future to the Japanese Jurisdictional Module.
  • All G-SIBs: Under this option, a Module Adhering Party identifies any current or future Regulated Entity with respect to the Japanese Jurisdictional Module that is part of a banking group that has been designated by the Financial Stability Board as a “global systemically important bank” (G-SIB), as of the date of the publication of the Japanese Jurisdictional Module, as a Regulated Entity Counterparty with respect to it. This election would include Regulated Entities within such G-SIB group that subsequently adhere to such Jurisdictional Module but not Regulated Entities that are members of banking groups that are subsequently identified as G-SIBs.
  • Entity-by-Entity: Under this option, the Module Adhering Party chooses to identify one or more Regulated Entities with respect to the Japanese Jurisdictional Module as Regulated Entity Counterparties with respect to it. The Module Adhering Party can notify each Regulated Entity that it identifies as a Regulated Entity Counterparty, either through ISDA Amend or by sending a bilateral “Module Adherence Notice” directly to such Regulated Entity. Note that a Module Adhering Party that chooses to identify one or more Regulated Entities as Regulated Entity Counterparties with respect to it may choose between Regulated Entities in the same banking group within the Japanese Jurisdictional Module.

Note that a Module Adhering Party can elect both option 2 to identify all G-SIB Regulated Entities as its Regulated Entity Counterparties and option 3 to identify additional Regulated Entities as its Regulated Entity Counterparties.

Once I submit my Adherence Letter, is my adherence to the Japanese Jurisdictional Module complete or are there any other steps I have to take?

Depending on the elections you make as a Module Adhering Party, you may be required to send notices to Regulated Entity Counterparties after you submit your Adherence Letter to complete your adherence to the Japanese Jurisdictional Module.

Entity-by-Entity Designation

If you adhere as a Module Adhering Party and elect to identify Regulated Entity Counterparties on an “Entity-by-Entity” basis (i.e., option 3 above), you need to take steps to identify Regulated Entity Counterparties. You can do this either (1) through ISDA Amend or (2) by sending a bilateral “Module Adherence Notice” to each Regulated Entity Counterparty. Your contracts will not be amended until the date you notify a Regulated Entity that it is a Regulated Entity Counterparty with respect to you.

If you wish to use ISDA Amend to identify one or more specific Regulated Entities as Regulated Entity Counterparties with respect to you, you may do so by using the ISDA Amend website.

To use the ISDA Amend website, you will need to have an account with ISDA Amend, log in and complete the steps necessary to make Entity-by-Entity elections.

If you wish to identify one or more specific Regulated Entities as Regulated Entity Counterparties with respect to you by sending such Regulated Entity or Regulated Entities bilateral Module Adherence Notices, rather than through ISDA Amend, such notices must at a minimum (1) identify the Module Adhering Party and the Jurisdictional Module and (2) identify the Regulated Entity as a Regulated Entity Counterparty with respect to the Module Adhering Party. ISDA has published a sample Module Adherence Notice that Module Adhering Parties can use to make Entity-by-Entity elections.

Adherence as an Agent on Behalf of Clients

If you are an agent adhering on behalf of “some but not all” clients, you must either identify the clients on whose behalf you are adhering in an annex to your Adherence Letter (which will be made public on the ISDA website) or send a list to each Regulated Entity Counterparty with respect to such clients identifying the clients on whose behalf you are adhering.

If you are an agent adhering on behalf of “all” clients that you represent, you may, but are not required to, identify the clients on whose behalf you are adhering, either in an annex to your Adherence Letter (which will be made public on the ISDA website) or by sending a list of the clients on whose behalf you are adhering to each Regulated Entity Counterparty with respect to such clients.

If you wish to use ISDA Amend to notify your Regulated Entity Counterparties of the clients on whose behalf you are adhering, you may do so by using the ISDA Amend website. To use the ISDA Amend website, you will need to have an account with ISDA Amend, log in and complete the steps necessary to provide Regulated Entity Counterparties with the lists of clients on whose behalf you are adhering.

If you wish to bilaterally notify your Regulated Entity Counterparties of the clients on whose behalf you are adhering, ISDA has published a sample Underlying Funds Notice that agents can use to notify their Regulated Entity Counterparties of the clients on whose behalf they are adhering.

How does the Japanese Jurisdictional Module relate to the Japanese Regulation?

The Japanese Jurisdictional Module is intended to facilitate compliance with the Japanese Regulation. The provisions of the Japanese Jurisdictional Module that amend Covered Agreements are based on the provisions of the Japanese Regulation and the public responses of the JFSA to the comments received from industry on the consultation in respect of the Japanese Regulation.

Note also, that as discussed in Question 5 of the general FAQs for the ISDA Jurisdictional Modular Protocol, amendments in a Jurisdictional Module, including the Japanese Jurisdictional Module, are made to Covered Agreements on a “retrospective” and “prospective” basis, even if this is not required by the Japanese Regulation.

Parties should consult with their legal advisers and any other adviser they deem appropriate to understand the requirements of the Japanese Regulation.

Why are certain terms in italics and others in quotation marks?

Words and phrases in quotation marks have the meaning given in the Japanese Regulation to the bracketed and italicized Japanese word or phrase immediately following such word or phrase. The Japanese Jurisdictional Module is interpreted in accordance with the Japanese Regulation.

What agreements are Covered Agreements under the Japanese Jurisdictional Module?

Japanese Regulated Agreements, as defined under the Japanese Jurisdictional Module, are Covered Agreements under the Japanese Jurisdictional Module.

A Japanese Regulated Agreement is, as such terms are defined in the Japanese Regulation, a “contract” [keiyaku], including an existing contract, which is governed by laws other than Japanese law and includes a “Clause on Specified Cancellation, etc.” [tokutei kaijo to no joko] that relates to a “Subject Transaction” [taisho torihiki].

What entities are Regulated Entities under the Japanese Jurisdictional Module?

A Regulated Entity under the Japanese Jurisdictional Module is, as such terms are defined in the Japanese Regulation, any:

(a) “financial institution” [kinyu kikan] subject to the “confirmation” [nintei] prescribed in Article 102(1) of the “Deposit Insurance Act” [yokin hoken ho]; or

(b) “financial institution, etc.” [kinyu kikan to] subject to the “specified confirmation” [tokutei nintei] prescribed in Article 126-2(1) of the “Deposit Insurance Act” [yokin hoken ho].

When does the Japanese Jurisdictional Module become effective?

The Japanese Jurisdictional Module becomes effective on the later of (i) 1 April 2017 or (ii) the “Implementation Date” (the date that both parties submit, and have accepted, their Adherence Letters for the Japanese Jurisdictional Module) with respect to a Module Adhering Party and a Regulated Entity Counterparty.

How do I sign up to the Japanese Jurisdictional Module?

Please see the general ISDA Jurisdictional Modular Protocol FAQs for information on adherence to Jurisdictional Modules and the ISDA Jurisdictional Modular Protocol.